Safety Precautions
Always wear eye protection and a dust mask when operating the DeWalt 735 planer. Ensure cutter knives are securely mounted as described in the manual. Regularly inspect and maintain the tool to prevent accidents and ensure optimal performance.
1.1 General Safety Guidelines
Before operating the DeWalt 735 planer‚ thoroughly read and understand the instruction manual. Always wear eye protection and a dust mask to safeguard against debris. Ensure the work area is clean and well-lit to avoid accidents. Keep loose clothing or long hair tied back to prevent entanglement with moving parts. Avoid wearing jewelry that could interfere with operation. Maintain a firm grip on the material being planed to ensure control. Never reach into the planer while it is in operation‚ as this can cause severe injury. Regularly inspect the tool and accessories for damage or wear‚ and replace them as needed. Properly maintain the planer to ensure optimal performance and safety. Always disconnect the power source before performing maintenance or adjustments. Familiarize yourself with the location of emergency stop mechanisms. Keep children and bystanders away from the work area. Follow all safety guidelines to minimize risks and ensure a safe working environment.
1.2 Understanding Warning Symbols
Warning symbols in the DeWalt 735 planer manual are crucial for ensuring safe operation. These symbols are designed to alert users to potential hazards and provide clear guidance to avoid accidents. The “DANGER” symbol indicates an immediately hazardous situation that could result in death or serious injury if not avoided. Always take immediate action when this symbol is present.
The “WARNING” symbol signals a potentially dangerous situation that could lead to injury or damage if precautions are not taken. The “CAUTION” symbol alerts users to less severe hazards or important operating instructions that must be followed to ensure proper function and safety.
Understanding these symbols is essential for safe and effective use of the planer. Take time to review and comprehend all warning symbols in the manual before operating the tool. Ignoring these warnings can lead to serious consequences‚ including injury or equipment damage. Regularly review the manual to stay informed and ensure compliance with safety guidelines.
Operating Instructions
Start the planer and slide material under the carriage‚ ensuring it lies flat. Operate smoothly‚ maintaining control throughout the process to achieve consistent results.
2.1 Starting the Planer
Before starting the DeWalt 735 planer‚ ensure the work area is clear of debris and the planer is placed on a stable‚ flat surface. Always wear safety goggles and a dust mask for protection. Plug in the planer and ensure the power switch is in the “OFF” position before connecting to a power source. Check that all loose clothing or jewelry is secured to avoid entanglement. Place the material to be planed on the table‚ ensuring it lies flat and is properly aligned with the carriage. Double-check that the cutter knives are securely mounted as described in the manual. Turn on the planer and allow it to reach full operating speed before engaging the material. Maintain firm control throughout the planing process to ensure even results. Always follow the manufacturer’s guidelines for proper operation and safety.
2;2 Adjusting the Height Setting
Adjusting the height setting on the DeWalt 735 planer is essential for achieving precise results. Begin by ensuring the planer is turned off and disconnected from the power source. Locate the height adjustment handle‚ typically positioned near the carriage. Turn the handle clockwise to lower the carriage or counterclockwise to raise it‚ depending on the desired thickness of your material. Always use a ruler or caliper to verify the height setting before starting the planing process. For optimal accuracy‚ make small adjustments and test the setting on scrap material. If you notice uneven results‚ refer to the manual for calibration instructions. Remember to wear safety goggles and a dust mask when adjusting or operating the planer. Proper height adjustment ensures even planing and prevents damage to the tool or material. Always follow the manufacturer’s guidelines for specific adjustment procedures to maintain safety and performance.
Key Features
The DeWalt 735 planer features a powerful three-blade cutter system for smooth finishes and minimal snipe. It includes a dust collection port for efficient debris removal and an adjustable height setting for precise material thickness control.
3.1 Minimizing Snipe
Minimizing snipe is crucial for achieving smooth‚ even finishes when using the DeWalt 735 planer. The planer features a built-in device designed to automatically reduce the movement that causes snipe during operation. To further minimize snipe‚ ensure the material is properly positioned under the carriage and lies flat against the base. Always feed the wood consistently and at the correct rate to maintain even pressure. Sharp cutter knives are essential for clean cuts‚ so replace them as needed. Additionally‚ proper alignment of the material and the planer’s table will help reduce the risk of snipe. For best results‚ avoid uneven or warped boards‚ as they can exacerbate snipe. By following these guidelines and utilizing the planer’s built-in features‚ you can achieve professional-grade finishes with minimal effort.
Maintenance
Regularly inspect and maintain the DeWalt 735 planer to ensure optimal performance. Sharpen or replace cutter knives as needed‚ and ensure all bolts are firmly tightened before use. Connect to a dust collection system for efficient debris removal.
4.1 Regular Maintenance Tips
Regular maintenance is crucial to ensure the DeWalt 735 planer operates efficiently and safely. Start by inspecting the cutter knives for wear or damage and replacing them as needed. Tighten all bolts and fasteners before each use to maintain proper alignment and prevent vibrations. Additionally‚ clean the planer table and rollers regularly to remove dust and debris‚ which can interfere with smooth operation.
- Sharpen or replace dull knives promptly to avoid tearing the wood and reducing finish quality.
- Check and replace the dust collection system’s filters to ensure optimal performance and reduce dust exposure.
- Lubricate moving parts according to the manual’s recommendations to minimize friction and wear.
- Inspect the power cord and connections for damage‚ ensuring they are in good condition before use.
- Store the planer in a dry‚ clean environment to prevent rust and corrosion when not in use.
By following these maintenance tips‚ you can extend the lifespan of your DeWalt 735 planer and ensure consistent‚ professional-grade results in your woodworking projects.